Double-Column Servo Universal Material Tensile Test Machine
Model: GC-WS-2000S
Product introduction
Servo universal tensile test machine is suitable for rubber and plastic materials for stretching, compression, bending, shearing, tearing, stripping, etc. It is widely used in building materials, aerospace, machinery manufacturing, wire and cable, rubber, plastics, textile, home appliances and other industries of material inspection and analysis.
2. Features:
The plastic tensile machine is suitable for testing the mechanical properties of rubber materials such as tension, compression, bending, shearing, tearing and peeling. The functions of cycle load cycle, deformation cycle and displacement cycle. Obtain elongation, tensile strength, flexural modulus, elastic modulus, yield strength, net energy, return energy, total energy and other indicators. It can be equipped with high and low temperature test chambers, high temperature furnaces and other expansion devices.
PC is used for data processing and analysis, and the test results can be automatically saved. After the test, the test curve can be recalled, and the test process can be reproduced through the curve traversal, or the curve comparison and curve amplification can be performed. The test software under Windows and visit platforms has strong data and graphics processing functions, and can print out complete test reports and test curves in real time.
Test standards
| GB/T 1040-2006 | Test mothod for tensile properties |
| GB/T 9341-2008 | Test method for bending properties of plastics |
| ISO 527-1993 | Plastics - determination of tensile properties |
| GB/T 13022-91 | Methods of tensile test for plastic films |
| ISO 178-2004 | Plastics bending test |
| ASTM D 638-2008 | Standard test method for tensile properties of plastics |
Specifications
| Model | GC-WS-2000S |
| Type | Double column |
| Load range | 5KN,10KN,20KN |
| Control motor | AC Servo Motor |
| Servo drivers | AC drive |
| Test speed | 0.01~500mm/min |
| Power accuracy | ≤0.5% |
| Resolution | 1/250000 |
| Power unit | N,kg,Lb,KN... |
| Extensometer | Large Deformation Extensometer |
| Extensometer accuracy | ±0.01mm |
| Test stroke | 800mm |
| Test width | 400mm |
| Control mode | Computer software control |
| Fixture configuration | Including a set of conventional limit test fixture |
| Protective device | Leakage protection, overload automatic shutdown protection, travel switch protection, etc |
| Protected mode | Computer printout |
| Power | 220V/50HZ |
